Vibration Control of Tapering E-FGM Porous Wind Turbine Blades Using Piezoelectric Materials

Khalid El Harti; Mohamed  Touil; Rachid Saadani; Miloud   Rahmoune

doi:10.51646/jsesd.v14iSI_MSMS2E.402

Authors

Khalid El Harti Laboratory of Advanced Materials Studies and Applications, FS-EST, Moulay Ismail University of Meknes, Meknes, Morocco.
Mohamed Touil Laboratory of Advanced Materials Studies and Applications, FS-EST, Moulay Ismail University of Meknes, Meknes, Morocco.
Rachid Saadani Laboratory of Advanced Materials Studies and Applications, FS-EST, Moulay Ismail University of Meknes, Meknes, Morocco.
Miloud Rahmoune Laboratory of Advanced Materials Studies and Applications, FS-EST, Moulay Ismail University of Meknes, Meknes, Morocco.

DOI:

https://doi.org/10.51646/jsesd.v14iSI_MSMS2E.402

Keywords:

Active vibration control, piezoelectricity, tapered beam, FGM porous materials, turbine blade.

Abstract

Piezoelectric materials have many interesting applications thanks to their ability to generate an electrical voltage when subjected to mechanical pressure, and vice versa. In the field of vibration energy recovery, these materials can convert mechanical vibrations into electrical energy. For example, piezoelectric sensors integrated into roads or pavements can generate electricity from vibrations caused by vehicles or pedestrians. In the field of wind turbines, the vibratory control of wind turbine blades can increase the overall efficiency of these systems. Additionally, composite materials are being increasingly integrated into the construction of mechanical systems, and specifically FGM materials. This work focuses on the active vibration control of FGM beams with non-uniform cross-sections, using piezoelectric materials. Euler-Bernoulli beam theory combined with the FEM is applied to an FGM beam. The equation of motion is generated using Hamilton's principle.

Downloads

Download data is not yet available.

Metrics

Metrics Loading ...

References

. W. P. Mason, Piezoelectricity, its history and applications. The journal of the Acoustical Society of America, 70.6, 1561-1566 (1981). DOI: https://doi.org/10.1121/1.387221

. I. R. Henderson, Piezoelectric Ceramics: Principles and Applications APC International. (APC International, Ltd., Pennsylvania, USA, 2006).

. M. Safaei, H. A. Sodano, and S. R. Anton, A review of energy harvesting using piezoelectric materials: state-of-the-art a decade later (2008–2018). Smart materials and structures 28.11, 113001 (2019). DOI: https://doi.org/10.1088/1361-665X/ab36e4

. C. Cheng, et al. A high density piezoelectric energy harvesting device from highway traffic—System design and road test. Applied Energy 299, 117331 (2021). DOI: https://doi.org/10.1016/j.apenergy.2021.117331

. M. A. K. Bulbul, et al. Energy harvesting for electric train: application of multi-renewable energy sources with sophisticated technology. European Journal of Advances in Engineering and Technology 4.11, 858-865 (2017).

. M. S. Vijaya, Piezoelectric materials and devices: applications in engineering and medical sciences. CRC press, (2012).

. A. Toprak, and O. Tigli. Piezoelectric energy harvesting: State-of-the-art and challenges. Applied Physics Reviews 1.3, (2014). DOI: https://doi.org/10.1063/1.4896166

. L. F. Walubita, et al. Prospective of societal and environmental benefits of piezoelectric technology in road energy harvesting. Sustainability 10.2, 383 (2018). DOI: https://doi.org/10.3390/su10020383

. P. Shivashankar, and S. J. S. M. Gopalakrishnan, Review on the use of piezoelectric materials for active vibration, noise, and flow control. Smart materials and structures 29.5, 053001 (2020). DOI: https://doi.org/10.1088/1361-665X/ab7541

. K. Uchino, Advanced piezoelectric materials: Science and technology. (Woodhead Publishing, 2017).

. S. D.Mahapatra, et al. Piezoelectric materials for energy harvesting and sensing applications: roadmap for future smart materials. Advanced Science 8.17, 2100864 (2021). DOI: https://doi.org/10.1002/advs.202100864

. H. Weifei, D. Park, and C. DongHoon, Structural optimization procedure of a composite wind turbine blade for reducing both material cost and blade weight. Engineering Optimization 45.12, 1469-1487 (2013). DOI: https://doi.org/10.1080/0305215X.2012.743533

. https://innovation.engie.com/en/sustainable_technologies/detail/wind-turbine-blade-circularity/27093

. K. El Harti, et al. Active Vibration Control of Non-uniform Section Beam. International Moroccan Congress of Mechanics. Cham: Springer Nature Switzerland, 2022. DOI: https://doi.org/10.1007/978-3-031-46973-2_2

. S. Shabani, and Y. Cunedioglu. Free vibration analysis of cracked functionally graded non-uniform beams, Materials Research Express 7, 1 (2020). DOI: https://doi.org/10.1088/2053-1591/ab6ad1

. K. El Harti, et al. Dynamic control of Euler Bernoulli FG porous beam under thermal loading with bonded piezoelectric materials. Ferroelectrics 558.1, 104-116 (2020). DOI: https://doi.org/10.1080/00150193.2020.1735895

. K. El Harti, R. Saadani, and M. Rahmoune. Active Vibration Control of Timoshenko Sigmoid Functionally Graded Porous Composite Beam with Distributed Piezoelectric Sensor/Actuator in a Thermal Environment. Designs 7.1, 2 (2022). DOI: https://doi.org/10.3390/designs7010002

. K. El Harti, et al. Dynamic analysis and active control of distributed piezothermoelastic FGM composite beam with porosities modeled by the finite element method. Composites: Mechanics, Computations, Applications: An International Journal 12.1 (2021). DOI: https://doi.org/10.1615/CompMechComputApplIntJ.2021036981

. K. El Hartı, R. Saadanı, and M. Rahmoune. Dynamic control of non-linearly tapering fgm beams. The Eurasia Proceedings of Science Technology Engineering and Mathematics 18, 46-54 (2022). DOI: https://doi.org/10.55549/epstem.1192327

. G. Lu, et al., Dynamic response of porous E-FGM thick microplate resting on elastic foundation subjected to moving load with acceleration, Thin-Walled Structures 173, 108981 (2022). DOI: https://doi.org/10.1016/j.tws.2022.108981